Do not care more than car polishing wax protection car paint commonly used methods

The owner's car should not be polished many times. It is most suitable for one or two times a year. Fan Liangyu, after sales director of Zhongshan Fumao Automobile Sales Co., Ltd., said in an interview with reporters that the auto body paint consists of primer, intermediate coating and Topcoat. The polishing used in auto detailing is mainly performed on the top surface of the automotive paint. The thinner finish is not suitable for the owner to frequently polish and polish the car paint, which will make the auto paint thinner and thinner.

 

The car parked on the open ground, in the face of the high-temperature sunlight, or the extremely rapid rainstorm, how the maintenance of the owner's car auto body paint becomes a concern for the owner. In an interview with reporters, Fan Liangchun said that the hot and cold, the weather changes quickly, the test of the car body paint is very large, plus the owner in the process of driving, the body will inevitably stick with sand, or other acidic substances, therefore, paint The maintenance is very important.

Waxing is a common method to protect car Auto Paint. Don't neglect the excrement of bird worms. It has very strong acidity, completely melts the car body paint. When it is light, it will cause Car paint spots. In severe cases, it can make the car autobody paint swell and crack. phenomenon. Fan Liangyi told reporters that in terms of protecting car body paint, waxing is a method commonly used by car owners to protect Car Paint. Its main function is to inhibit the oxidation of car paint by harmful components from the outside, resist ultraviolet rays, and enhance the brightness of certain paints. However, it takes a short period of time to insist that it has an effect. It is difficult to remove scratches without polishing.

Fan Liangfu told reporters, “The owner’s car should not be polished many times. It is the most suitable one to two times a year. The car body paint is composed of a primer, an intermediate coating, and a topcoat. The polishing used in auto detailing is mainly car paint. The top surface of the topcoat is applied, and the thinner topcoat is not suitable for the owner to polish and polish the paint frequently, which will make the auto paint thinner and thinner, and eventually lose the decorative effect and protection ability.”

The effect of sealing glaze is good, but the price is relatively expensive. When the glaze is sealed for the first time, various oxides, asphalt, scratches, etc., of the bodywork are completely removed by polishing, which can increase the strength of the automotive

paintwork and prevent fine scratches caused when sand blows on the body. Stay relatively long. However, in the future sealing process, it is best not to use polishing frequently. Even if it is necessary to use it, it is best to use it locally and then make up the glaze. Fan Lianglu introduced that many owners are used to wipe dust from the body with a towel or feather duster. In fact, this is also undesirable because it will scratch the paint.